Contact info
- +31 (0) 546 - 876 510
- primaair@reinderscorp.com
- Plesmanweg 17, 7602PD, Almelo, The Netherlands
- Mon-Fri 08:00 – 16:30 CET (Central European Time)
PrimaAir Advanced Pump Unit
The PrimaAir Advanced pump unit is suitable for humidifying up to 8 rooms separately. The Advanced pump unit has a maximum capacity of 600 litres of water per hour. This is divided among the rooms. The desired air humidity can be set using the electronic display, after which the system will automatically switch on or off. The humidity is measured with an electronic humidity sensor.
The advantages of the Advanced pump unit:
– Equipped with a 7 inch HMI interface with touch screen
– Self-adjusting group name
– Touchscreen control panel
– Temperature and humidity display per group
– Multiple setting options
– Operation and readout via company network possible (optional)
– Extension with data lottery via HMI and network possible (optional)
Specifications:
High-pressure pump with electric motor type 010370
Power: 3.0 kW
Capacity: 10.0 l/m
Pressure: max 80 bar
How the Advanced pump unit works
The pump unit is very suitable for pumping water for air humidification. The pump unit consists of a stainless steel frame containing a 5 and 20 micron filter, minimum pressure protection, magnetic valves to humidification units, electronic display with touch screen, water softener and pump with electric motor. The pump consists of an aluminium gearbox, ceramic plungers, valve body of brass or stainless steel and valves of stainless steel.
The pump unit draws water from the water mains and flows it through a 3 micron filter to the suction side of the high pressure pump. The pump delivers the water under high pressure to the pipe system. The pressure is set at approximately 70 bar by means of a pressure regulator.