The PrimaAir Compact pump unit is suitable for humidifying 2 to 3 rooms separately. The Compact pump unit has a maximum capacity of 180 litres of water per hour. This is distributed over 2 to 3 groups (rooms). The 1.1 kW electric motor is very economical. In addition, the pump unit is easy to install and maintenance-friendly.
– Energy-efficient thanks to its 1.1 kW electric motor
– Easy to install and to expand (low assembly costs)
– Simple operation
– Small and powerful system for 2 to 3 rooms
– High humidification efficiency
High-pressure pump with electric motor type 010380
Power: 1.1 kW
Capacity: 3.3 l/m
Pressure: max 80 bar
Using the electronic display, the desired humidity can be set, after which the system switches on or off automatically. The humidity is measured with an electronic humidity sensor.
The pump unit is very suitable for pumping water for air humidification. The pump unit consists of a stainless steel casing containing a 3 micron filter, minimum pressure protection, pressure regulator, pressure indicator, solenoid valves to humidification units, PLC with a 5 inch HMI interface with touch screen and a pump with electric motor. The pump consists of an aluminium gearbox, ceramic plungers, valve body in brass or stainless steel and valves in stainless steel.
The pump unit draws water from the water mains and flows it through a 3 micron filter to the suction side of the high pressure pump. The pump delivers the water under high pressure to the pipe system. The pressure is set at approximately 70 bar by means of a pressure regulator.
Download the brochure for more information: Brochure-PrimaAir-pompunit-Compact
– Power point 230 V 1 phase + neutral, 10 Ampere
– Water connection with backflow prevention