Adsorption Dehumidifier
Adsorption Dehumidifier 1000
As standard, this dryer is equipped with a robust stainless steel housing, optionally equipped with energy-efficient EC fans of high quality and low energy consumption.
- Process air 500 – 1000 m³/h
- Dehumidification capacity up to 6 kg/u
- 540 mm x 760 mm x 1100 mm
Very low maintenance requirements, easily expandable with heat recovery or cooling/heating water blocks for optimal control of process air temperature.
Download brochure Get in contactEigenschappen
- Betrouwbare werking
Kwaliteitseenheden ontwikkeld door ’s werelds toonaangevende experts op dit gebied. - Robuust & veerkrachtig
Ontworpen om constant gebruik te weerstaan. De standaard roestvrijstalen behuizing zorgt voor robuuste en hygiënische prestaties. - Volledige controle
Uitgebreid assortiment regelaars en sensoren om zowel de vochtigheid als het dauwpunt te regelen. De luchtontvochtiger kan op alle typen externe regelaars worden aangesloten. - Gemakkelijk te onderhouden
Ontworpen voor gemakkelijke toegang, dus eenvoudig en goedkoop te onderhouden. - Gemakkelijk te bedienen
Via microprocessorgestuurde besturingseenheden en geavanceerde sensoren, met de juiste mate van automatisering die u nodig hebt. - Energiezuinig
Ontworpen om zo weinig mogelijk energie te verbruiken en tegelijkertijd een maximaal effect te bereiken. - Lage operationele kosten
Lange levensduur en opmerkelijk goedkoop in gebruik. - Zeer eenvoudige installatie
Plaats het, sluit het aan en steek de stekker in het stopcontact.
Specificaties
| Process air | 500 – 1000 m³/h |
| Dehumidification capacity | up to 6 kg/h |
| Electrical connection power | 6,5 kW |
| Connection voltage | 400 / 50 / 3 V / Ph+N+PE |
| Dimension L x W x H | 532 mm x 756 mm x 1090 mm |
| Weight | 110 kg |
- Heat recovery module
The dehumidifier can be equipped with a highly efficient aluminium cross-flow air heat exchanger. This allows you to recover heat from the regeneration air leaving the dehumidifier. This thermal energy can then be reused to preheat the incoming regeneration air. This provides immediate savings in dryer energy consumption, resulting in a short payback period. - Air cooling
The dehumidifier can be equipped with an air-cooled regeneration module, to condense the water from the regeneration air. An ideal solution when a regeneration air duct is not a good idea or cannot be mounted. Including cable for connection to the dehumidifier. - Process cooling
The dehumidifier can be equipped with a special module to reduce and/or control the temperature and humidity of the dry air. This is particularly beneficial when the peaks of incoming process air are allowed to have minimal influence. In this case, some of the water in the air condenses, increasing the efficiency of the dehumidifier. With this dehumidifier, you can also choose a cooling module that allows you to control the process exhaust temperature. - Hygrostat
The hygrostat switches the dehumidifier to the desired relative humidity [%RV] in the air. - Dew point controller
The dew point controller is equipped with a capacitive humidity sensor and digital readout. The combination of relative humidity [%RV] and dew point temperature [°Cdp], with the possibility of setting e.g. both a set point of 60%RV and a dew point of 10°C, makes the controller suitable for many process applications.
Mollier diagram
The Mollier diagram, also known as the h-x diagram, is a visual tool used to represent the thermodynamic properties of moist air. The diagram was developed by Richard Mollier in 1923 and is often used in industry for applications such as air handling, refrigeration and heating systems. Our experts at Reinders Industrial can help advise you on the Mollier Diagram.
Industries and applications
