Reinders Corporation®
Home Adsorption Dehumidifier 1000

Adsorption Dehumidifier

Adsorption Dehumidifier 1000

As standard, this dryer is equipped with a robust stainless steel housing, optionally equipped with energy-efficient EC fans of high quality and low energy consumption.


  • Process air 500 – 1000 m³/h
  • Dehumidification capacity up to 6 kg/u
  • 540 mm x 760 mm x 1100 mm

Very low maintenance requirements, easily expandable with heat recovery or cooling/heating water blocks for optimal control of process air temperature.

Download brochure Get in contact

Features

  • Reliable operation
    Quality units developed by the world’s leading experts in the field.
  • Robust & resilient
    Designed to withstand constant use. Standard stainless steel housing ensures robust and hygienic performance.
  • Full control
    Wide range of controllers and sensors to control both humidity and dew point. The dehumidifier can be connected to all external controller types.
  • Easy to maintain
    Designed for easy access, therefore simple and inexpensive to maintain.
  • Easy to operate
    Through microprocessor-based control units and advanced sensors, with the right degree of automation you need.
  • Energy-efficient
    Designed to consume as little energy as possible while at the same time achieving a maximum effect.
  • Low operational costs
    Long service life and remarkably inexpensive to operate.
  • Very easy installation
    Place it, connect it and plug it in.

Specs

Process air500 – 1000 m³/h
Dehumidification capacityup to 6 kg/h
Electrical connection power6,5 kW
Connection voltage400 / 50 / 3 V / Ph+N+PE
Dimension L x W x H532 mm x 756 mm x 1090 mm
Weight110 kg

 

  • Heat recovery module
    The dehumidifier can be equipped with a highly efficient aluminium cross-flow air heat exchanger. This allows you to recover heat from the regeneration air leaving the dehumidifier. This thermal energy can then be reused to preheat the incoming regeneration air. This provides immediate savings in dryer energy consumption, resulting in a short payback period.
  • Air cooling
    The dehumidifier can be equipped with an air-cooled regeneration module, to condense the water from the regeneration air. An ideal solution when a regeneration air duct is not a good idea or cannot be mounted. Including cable for connection to the dehumidifier.
  • Process cooling
    The dehumidifier can be equipped with a special module to reduce and/or control the temperature and humidity of the dry air. This is particularly beneficial when the peaks of incoming process air are allowed to have minimal influence. In this case, some of the water in the air condenses, increasing the efficiency of the dehumidifier. With this dehumidifier, you can also choose a cooling module that allows you to control the process exhaust temperature.
  • Hygrostat
    The hygrostat switches the dehumidifier to the desired relative humidity [%RV] in the air.
  • Dew point controller
    The dew point controller is equipped with a capacitive humidity sensor and digital readout. The combination of relative humidity [%RV] and dew point temperature [°Cdp], with the possibility of setting e.g. both a set point of 60%RV and a dew point of 10°C, makes the controller suitable for many process applications.
Contact our experts for advice or information

    Request advice

    Mollier diagram

    The Mollier diagram, also known as the h-x diagram, is a visual tool used to represent the thermodynamic properties of moist air. The diagram was developed by Richard Mollier in 1923 and is often used in industry for applications such as air handling, refrigeration and heating systems. Our experts at Reinders Industrial can help advise you on the Mollier Diagram.

    Download Mollier Diagram

    Condense

    Industries and applications

    comment icon

    Contact us

      Contactformulier onderaan

      Plesmanweg 21
      7602 PD Almelo
      The Netherlands

      info@reinderscorp.com
      +31 (0) 546 – 876500