Reinders Corporation
Home Industries Metal Smelting and Casting

Smelting and Casting

In the environment of smelting and casting, where temperatures soar and fumes cloud, robust extraction systems from Extraction Systems and dehumidification systems from Industrial stand ready to clear the air and protect your workforce.

Extraction systems for smelting and casting

Extraction System – Compact filter (800 to 8,000 m³/h) – Extraction systems


  • For simple machine groups
  • Air volumes 800 to 8,000 m³/h
  • Cleaning rate of 99.9%
  • Stand time of 6,000 to 8,000 hours
  • Easy to replace
  • Downtime cleaning cycle for extra thorough cleaning

View product

Extraction System – Rotary valve (up to 35,000 m³/h) – Extraction systems


  • Suitable for medium-sized installations
  • Air volumes up to approximately 35,000 m3/h
  • Modular construction
  • The filtered material is discharged with a conveyor fan
  • Can prevent draught and temperature fluctuations

View product

Extraction System – Bag filter (up to 35,000 m³/h) – Extraction systems


  • Suitable for medium-sized installations
  • Air volumes up to 35,000 m³/h
  • The filtered material is collected in steel barrels, possibly to be provided with plastic bags
  • Can prevent draught and temperature fluctuations

View product

Extraction System – Worm filter (up to 60,000 m³/h) – Extraction systems


  • Suitable for medium to large installations
  • Air volumes up to 60,000 m³/h
  • Modular construction
  • Top blow-in technology ensures low dust load on the filter media

View product

Extraction System – Chain filter (up to 300,000 m³/h) – Extraction systems


  • Suitable for medium to very large plants and factories
  • Air volumes up to 300,000 m³/h
  • Modular construction
  • Top blow-in technology ensures low
  • Can prevent draught and temperature fluctuations

View product

Industrial dehumidifiers for smelting and casting

Adsorption Dehumidifier Bulk Solids – Adsorption dehumidifiers

Small, light and robust – The offered series of adsorption dryers consists of several small, lightweight, energy-efficient models specifically designed to help users address smaller or temporary solutions with process air volumes between 80 m³/h and 400 m³/h.
  • Process air 240 – 400 m3 / h
  • Dehumidification capacity up to 1,5 kg/u
  • 480 mm x 420 mm x 415 mm

The dehumidifiers have standard stainless steel housings for ruggedness and use one fan for both process air and regeneration air, making them extremely compact. These units are also specially designed to be rugged and withstand the bumping and rough handling often associated with lifting, moving and stacking of transportable dehumidifiers. Very useful for small-scale moisture control problems for stationary and permanent installations requiring dried air.
View product

Adsorption Dehumidifier 500 – Adsorption dehumidifiers

As standard, this air dryer is equipped with a robust stainless steel housing suitable for indoor installation, optionally equipped with energy-efficient EC fans of high quality and low energy consumption.
  • Process air 500 – 1000 m³ / h
  • Dehumidification capacity up to 6 kg/u
  • 540 mm x 760 mm x 1100 mm

The air dryer requires very little service, nevertheless, the air dryer is designed to be easily accessible so that the various components can be adequately checked and, if necessary, replaced quickly.
View product

Adsorption Dehumidifier 1000 – Adsorption dehumidifiers

As standard, the adsorption dehumidifier air 1000 is equipped with a robust stainless steel housing suitable for indoor installation, optionally equipped with energy-efficient EC fans of high quality and low energy consumption.
  • Process air 500 – 1000 m³ / h
  • Dehumidification capacity up to 6 kg/u
  • 540 mm x 760 mm x 1100 mm

Standard equipped with a robust stainless steel casing suitable for indoor installation, optionally equipped with energy-efficient EC fans of high quality and low energy consumption. Very low service requirement, easily expandable with heat recovery or cooling/heating water blocks for optimum process air temperature control. Learn more about how it works.
View product

Adsorption Dehumidifier 4000 – Adsorption dehumidifiers

As standard, the adsorption dehumidifier 4000 is equipped with a robust stainless steel housing suitable for indoor installation, optionally equipped with energy-efficient EC fans of high quality and low energy consumption.
  • Process air 1000 – 4000 m³ / h
  • Dehumidification capacity up to 20 kg/u
  • 825 mm x 1640 mm x 1725 mm

The adsorption air dryer 4000 is a complete unit that includes a rotor, a transmission motor, fans, a heater, air filters and an integrated electrical system with all components necessary for safe operation.
View product

Adsorption Dehumidifier 10.000 – Adsorption dehumidifiers

The offered adsorption air dryer 10,000 is the largest “standard” unit included in the range. Would you like a unit with a larger capacity? Please contact us.
  • Process air 4000 – 10.000 m³ / h
  • Dehumidification capacity up to 60 kg/u
  • 2080 mm x 1360 mm x 2160 mm

The adsorption air dryer 10,000 has as much as a moisture removal capacity of 25 liters to over 60 liters per hour. The air dryer is equipped with energy-efficient EC fans of high quality and low energy consumption.
View product

Condensation Dehumidifier (Custom) – Condensation dehumidifiers

The condensation dehumidifier achieves very low humidity levels, with the dehumidifier optimized to minimize energy consumption. The dehumidifier is particularly energetically efficient in very hot and humid air that condenses easily. View product

Hybrid Dehumidifier (Custom) – Hybrid dehumidifiers

The hybrid dehumidifier is excellent for processes with maximum drying temperatures. The dehumidifier has more residual heat than condenser heat alone and is fully optimized for minimum energy consumption.

The cabinet consists of a robust steel frame with aluminum cabinet profiles. In which the double-walled and insulated panels are made of galvanized and powder-coated sheets. The hybrid dehumidifier is equipped with class EU7 bag filters to protect internal components and prevent rapid fouling of the rotor keeping the drying capacity intact.
View product

Request advice

    Or give us a call…

    Climate solutions for smelting and casting operations

    comment icon

    Contact us

    Do you have any questions on our products, services or projects? Please feel free to contact us.

      Contactformulier onderaan

      Plesmanweg 21
      7602 PD Almelo
      The Netherlands

      info@reinderscorp.com
      +31 (0) 546 – 876500